Italo is a highly flexible, rugged, System-On-Module, or SOM that is based on the Xilinx Zynq®-7000 All Programmable (AP) SoC
It offers designers the flexibility to migrate between 7007, 7010, 7014,7020, Zynq-7000 AP SoC devices in a pin-compatible footprint. The Italo module contains the common functions required to support the core of most SoC designs, including DDR3 memory, configuration, Ethernet, USB, power and clocks.
It provides easy access to over 100 user I/O pins through three I/O connectors.
Designers can simply design their own carrier card, plug-in Italo, and start their application development with a proven Zynq-7000 AP SoC sub-system.
Features
The main component of Som ITALO is a Zynq ™ -7000 AP SoC architecture. This SOC class combines a dual-core Cortex ™ -A9 MPCore ™ ARM® processor with a 28nm Xilinx Artix FPGA matrix.
The logic part associated with the ARM section the Zynq includes:
- Xilinx® ZynqTM7020
- Dual ARM® CortexTM A9 MPCoreTM up to 800MHz
- NEONTM / FPU Engine
- 32KB I/D L1 Cache, 512KB L” Cache 256KB On-Chip Memory
- Hard Coded Peripherals: SPI, I2C, CAN, UART, GPIO, USB, GBit EMAC
The logic part associated with the FPGA section the Zynq includes:
- 85K Logic Cells (1.3M Approximate ASIC Gates)
- 220 Programmable DSP Slices
- 560KB of Internal Block RAM
DOCUMENTS
| SoM Technical Information | |
| Platform | Zynq 7020, Zynq 7010, Zynq 7014, Zynq 7007 |
| Ram | Up to 1GByte DDR3 |
| Rom | Up to 512Mbit QSPI and 4GByte Nand |
| Ethernet | 10/100/1000 Ethenet Phy |
| Usb | USB 2.0 OTG Phy |
| I/o | 108 user I/o and up to 50 differential pair |
| Power Supply | Single 5V power supply |
| On board voltage | 3.3V@600mA, 1.8V@600mA for user use |
| Bank Voltage | separate Power |
| Dimensions | 68mm X 32mm sodimm module |
Evaluation Board
The DVK carrier board supports development with the ITALO module and contains all the peripherals necessary for the management of Gigabit Ethernet, USB, as well as standard interfaces such as uSD card and USB-UART adapter. All programmable logic pins are available through the LPC FMC connector. In addition, an HDMI output port is available for models that mount the SoM model with Z7014 and Z7020
